| 摘要: |
| 该文利用滚球计算方法，通过天正电气TElec平台电气设计软件，生成两支或两支以上的独立接闪杆、架空接闪线的建筑物保护范围平面、三维效果图，直接输出计算表和计算书。操作简单、结果直观明了，代替了人工计算繁琐、容易出错的过程，大大提高了工作效率。同时软件输出结果与人工计算进行了对比验证，结果一致。该软件可在防雷建筑检测、防雷工程设计、雷灾调查等工作中进行广泛应用。 |
| 关键词: 天正电气；独立接闪杆；接闪线；保护范围 |
| DOI： |
| 投稿时间：2020-02-28 |
| 基金项目: |
|
| Preliminary Study on Three-dimensional Protection Scope of Lightning Protection Building Drawn by TIANZHENG ELectric |
| LUO Yehong,LIU Yanqun,CHEN Xiaoyang,YU Dongwen,GUO Xin |
| (Shaoguan Meteorological Bureau of Guangdong Province,Shaoguan 512028 ,China ;Chengdu University of Information Engineering,Chengdu 610225 , China;Meteorological Bureau of Ruyuan Yao Autonomous County, Guangdong Province, Ruyuan 512700 , China) |
| Abstract: |
| By using the rolling ball calculation method and the electrical design software of Tianzheng electric telec platform, two or more independent lightning rods and three-dimensional effect drawings of the protection range of buildings with overhead lightning wires are generated, and the calculation table and calculation sheet are output directly. The operation is simple and the result is intuitionistic. Instead of the complicated and error prone process of manual calculation, the work efficiency is greatly improved. At the same time, the software output results are compared with the manual calculation, and the results are consistent. The software can be widely used in lightning protection building detection, lightning protection engineering design, lightning disaster investigation and other work. |
| Key words: Tianzheng Electric；independent lightning rod；lightning wire；protection range |
